M6 Revolving Handle Double Nut - Clamps Any Flat Bracket, No Tapped Hole - size: M6 X 60mm Double Nut

About this item

• This M6 x P1.0 revolving handle uses a locking double-nut design for anyone replacing a worn trailer jack handle or hose reel handle: a second nut and an anti-loosening flange nut jam together against the bracket, holding this crank handle replacement solid through towing vibration even with no tapped lock-nut hole; for a simple mount, thread on just the first nut and run this m6 handle like a standard swivel handle without the second jam nut.
• Designed first as a boat trailer jack handle replacement, this M6 x P1.0 crank swaps onto trailer tongue jack handle mounts, camper jacks, garden hose reels, water hose reels and even a pressure washer hose reel handle, turning a stiff hand crank handle into smooth, low-fatigue rotation; the 44mm grip spins independently of the threaded stem so raising a trailer or cranking a heavy load never fights your wrist like a seized trailer crank handle replacement.
• The same M6 x P1.0 thread doubles as a table saw fence handle and table saw crank handle for blade-height adjustment, a drill press handle for quill feed, a lathe tailstock crank and a milling machine control, fitting many popular table saw parts once the shaft and threaded bore match; since fit depends on thread size rather than brand, measuring your old jack handle against this listing is usually enough to know it will seat on the spindle.
• Built for years of outdoor duty, this revolving handle knob is molded from engineering-grade Nylon PA6 over a steel spindle (C450) and steel nut, finished in yellow zinc so these crank handles resist rust, oil, weather and impact without cracking in cold or softening in heat; rated -4F to 200F with a 20+ year service life, it holds up on a boat trailer in salt air or a drill press handle in an unheated shop as reliably as a trailer jack handle on a daily-use camper.
• Before ordering this m6 handle, compare it against your old spinning handle or trailer handle crank: thread is M6 x P1.0, the plastic grip alone measures 44mm (1.73 in), total length with the threaded bolt is 60mm (2.36 in) rather than the grip alone, and grip diameter is 17mm (0.67 in), one set per package; measure your jack handle for trailer or hose reel mounts and check the bore and shaft before ordering so this swivel handle from DONGYANG seats correctly.

Overview

• Material: Alloy Steel, PA6, Plastic
• Brand: DONGYANG Ind. Co.,
• Color: Black
• Style: Classic
• Product Dimensions: 2.4"L x 2.4"W